Apr 27, 2024  
2020-2021 Undergraduate Catalog 
    
Catalog Navigation
  Catalog Home
  What’s New?
  General Education Requirements
  Regulations, Policies, Rights, & Responsibilities
  Colleges, Schools, Division and Departments
  Program Descriptions
  Course Descriptions
  Overlapping Course Content
  TransferIN.net Indiana Core Transfer Library
  Indiana Transfer Single Articulation Pathway - TSAP
  Academic Calendar
  Previous Catalogs
HELP
2020-2021 Undergraduate Catalog [Archived Catalog]

Course Descriptions

Course descriptions are listed in alphabetical order.

Standard information for each course includes the number, title, and credits (sometimes called credit hours or semester hours). For some courses, you will find information on the hours of class, laboratory, or studio for which the course is scheduled in each week of a regular semester; these weekly hours are expanded during summer sessions. Fees for courses are assessed on the basis of credits and other factors.

The course-numbering system generally suggests levels of difficulty and appropriateness. Courses at the 100 and 200 levels comprise introductory offerings and those are most commonly taken by freshmen and sophomores. Courses at the 300 and 400 levels are primarily for juniors and seniors. In some Purdue programs, undergraduates take courses at the 500 level, but generally courses numbered 500 and above are for graduate students.

Preparation for courses is indicated as follows:

P: indicates a prerequisite that must precede your enrollment in the course described. You may find one or more specific course numbers, the number of credits you should already have in a subject, a placement-test level, or other conditions.

C: indicates a corequisite that must be taken no later than the same semester in which you take the course described.

R: indicates a recommendation concerning conditions to be met for enrollment in the course.

When no subject code is shown for prerequisites, corequisites, and recommended courses, they are in the same subject area as the course being described. If you lack a prerequisite or corequisite, or if you wish to take a course numbered at a higher level than your present status, you should seek the department’s or instructor’s consent to enroll in the course.

V.T. means Variable Title and is shown for courses for which the title may be changed to specify the topic or other special focus of each offering.

Purdue University Fort Wayne reserves the right to add, withdraw, or change courses without notice.

 
 
  

  • MET 18000 - Materials and Processes

    Application and characteristics, both physical and chemical, of the materials most commonly used in industry; the mechanical processes by which materials may be shaped or formed.

    Preparation for Course
    P: ET 10600; C: MA 15300 or 15900.

    Cr. 3.
    Hours
    Class 2, Lab. 2,
  

  • MET 21600 - Machine Elements

    The design and analysis of machine components with emphasis on safety factors based on various failure theories in consideration of fluctuating loads, stress concentration, and other factors affecting failure. A study of standard machine elements such as brakes, clutches, belts, chains, gears, screws, springs, and bearings; their application, operational behavior, efficiency, economy, and standardization.

    Preparation for Course
    P: ET 20000, MET 10400, ECET 11400 and IET 20500 with a grade of C- or higher.

    Cr. 4.
    Hours
    Class 4.
  

  • MET 22300 - Introduction to Computer- Aided Modeling and Design

    An introduction to computer-aided modeling and design (CAMD) with hands-on experience in the operation of an interactive computer graphics system. Generation of 3-D computer models and preparation of working drawings including geometric dimensioning and tolerancing.

    Preparation for Course
    P: MET 10400 or ARET 12300 with a C- or better.

    Cr. 3.
    Hours
    Class 2, Lab. 3,
  

  • MET 24700 - Computer-Aided Tool and Fixture Design

    Tool design methods; tooling materials and heat treatment; design of cutting tools; gage design; design of drill jigs and fixtures; tool design for NE and CNC machines; tool design on the CAD system. Term projects using the CAD system are required.

    Preparation for Course
    P: MET 22300, MET 33500 and ET 19000 with a grade of C- or higher.

    Cr. 3.
    Hours
    Class 2, Lab. 3,
  

  • MET 27500 - Industrial Practice I

    Practice in industry and written reports of this practice for co-op students.

    Preparation for Course
    P: admission to the Cooperative Education program.

    Cr. 1.
  

  • MET 27600 - Industrial Practice II

    Practice in industry and written reports of this practice for co-op students.

    Preparation for Course
    P: MET 27500.

    Cr. 1.
  

  • MET 29500 - Industrial Practicum

    For full-time students who have completed one year of study. Practical problems in local industry limited to about 10 hours per week for which the student receives some remuneration. May be repeated.

    Cr. 1.
  

  • MET 29900 - Mechanical Engineering Technology

    Independent project laboratory work is conducted under the supervision of appropriate MET faculty. Hours and subject matter must be arranged by instructor and approved by MET Curriculum Subcommittee.

    Cr. 1-3.
    Variable Title
    (V.T.)
  

  • MET 30000 - Applied Thermodynamics

    The fundamentals of thermodynamics including application of the first and second laws, enthalpy, entropy, reversible and irreversible processes.

    Preparation for Course
    P: MA 22700 and PHYS 21800 with grades of C- or better.

    Cr. 3.
    Hours
    Class 3,
  

  • MET 31200 - Dynamics and Mechanisms

    The slider crank, four-bar linkage and Scotch Yoke mechanisms along with cam and follower systems will be studied. Both the kinematics and dynamics of the mechanisms will be covered. Dynamic studies will include both Newton’s Second Law and energy methods.

    Preparation for Course
    P: ET 19000, MA 22700,  and PHYS 21800 with grades or C- or better.

    Cr. 3.
    Hours
    Class 3.
  

  • MET 33000 - Introduction to Fluid Power

    A study of the development, transmission, and utilization of power through fluid power circuits and controls.

    Preparation for Course
    P: MA15400 or MA 15900 with a grade of C- or better.

    Cr. 3.
    Hours
    Class 2, Lab. 2.
  

  • MET 33500 - Basic Machining

    A comprehensive survey of machine tools as they are used in converting workpieces into finished products with consideration of cost, quality, quantity, and interchangeability and safety requirements. Actual operation analysis of many machine tools set-ups will be provided for comparison studies.

    Preparation for Course
    P: MET 18000, PHYS 21800 and MA 15400 or 15900 with grades of C- or better.

    Cr. 3.
    Hours
    Class 2, Lab. 3,
  

  • MET 34700 - Programming of Automation Systems

    A study of programming on computer numerical control systems, including tool geometry compensation, coordinate transformation, and macros for developing canned cycles; and study of geometric and kinetic characteristics of industrial robots, end-effectors, sensors, applications, programming and safety.

    Preparation for Course
    P: ECET 11400 or 26400, MET 22300, MET 33500, ENG W234, and PHYS 21900, all with grades of C- or better.

    Cr. 3.
    Hours
    Class 2, Lab 3.
  

  • MET 35000 - Applied Fluid Mechanics

    The fundamentals of fluid mechanics including properties of fluid, pressure, hydrostatic force on submerged areas; kinematics and dynamics of fluid flow; friction losses and sizing of pipe.

    Preparation for Course
    P: PHYS 21800 and MA 22700 with a grade of C- or better.

    Cr. 3.
    Hours
    Class 3,
  

  • MET 37000 - Introduction to Heat Transfer

    This course introduces fundamental principles of heat transfer: conduction, natural convection, forced convection, and radiation, with an emphasis on practical applications (e.g. HVAC). Both analytical and numerical solution methods will be introduced. Calculated solutions will be compared with measurements using in-class demonstrations.

    Preparation for Course
    P: Junior standing; MA 22700 and PHYS 21900 with grades of C- or better.

    Cr. 3.
  

  • MET 37500 - Industrial Practice III

    Practice in industry and written reports of this practice for co-op students.

    Preparation for Course
    P: MET 27600.

    Cr. 1.
  

  • MET 37600 - Industrial Practice IV

    Practice in industry and written reports of this practice for co-op students.

    Preparation for Course
    P: MET 37500.

    Cr. 1.
  

  • MET 38100 - Engineering Materials

    Applications and characteristics of engineering materials used in industry with special emphasis on plastics and other nonferrous materials such as elastomers, composites, ceramics, and glass, including a survey of the processes involved. Also, metallurgy, failure analysis, corrosion resistance, and surface treatments of metallic and nonmetallic materials.

    Preparation for Course
    P: MET 18000 and CHM 11100 with a grade of C- or better. 

    Cr. 3.
    Hours
    Class 3,
  

  • MET 44000 - Advanced CNC Machining

    Advanced CNC Machining is a continuation of the basic machining and introductory CAD courses. Students learn additional concepts for manufacturing metal and plastic parts by developing CAD drawings, translating these drawings into CNC code, producing parts on a CNC lathe and a CNC machining center, and analyzing the process and results. Shop safety and preventive maintenance are also emphasized.

    Preparation for Course
    P: MET 22300 and MET 33500 with a grade of C- or better.

    Cr. 3.
  

  • MET 47500 - Industrial Practice V

    Practice in industry and written reports of this practice for co-op students.

    Preparation for Course
    P: MET 37600.

    Cr. 1 - 2.
  

  • MET 48700 - Instrumentation and Automatic Control

    Instrumentation for pressure, temperature, velocity, rpm, strain, force, displacement, acceleration, counting, and sound will be studied. Automatic control will be studied covering topics of on-off and proportional control, programmable controllers, and computer control.

    Preparation for Course
    P: ECET 21100 with a grade of C- or better.

    Cr. 3.
    Hours
    Class 2, Lab. 2,
  

  • MET 49400 - Senior Design and Analysis

    This course will focus on mechanical design, finite element analysis, environmental concerns, and/or ethical challenges. Technical reports will be written and one will involve an oral presentation.

    Preparation for Course
    P: senior class standing.

    Cr. 3.
    Hours
    Class 3,
  

  • MET 49900 - Mechanical Engineering Technology

    Hours and subject matter to be arranged by staff.

    Cr. 1-6.
    Hours
    Class 0-3, Lab. 2-6,
    Variable Title
    (V.T.)
  

  • MSL 10100 - Foundation Officership

    Examine the unique duties and responsibilities of officers. Discuss organization and role of the Army. Review basic life skills pertaining to fitness and communication. Analyze Army values and expected ethical behavior.

    Cr. 1-2.
  

  • MSL 10200 - Basic Leadership

    Presents fundamental leadership concepts and doctrine. Practice basic skills that underlie effective problem solving. Apply active listening and feedback skills. Examine factors that influence leader and group effectiveness. Examine the officer experience.

    Cr. 1-2.
  

  • MSL 20100 - Individual Leadership

    Develop knowledge of self-confidence and individual leadership skills. Develop problem-solving and critical-thinking skills. Apply communication, feedback, and conflict resolution skills.

    Cr. 2-3.
  

  • MSL 20200 - Leadership and Teamwork

    Focuses on self-development guided by knowledge of self and group processes. Challenges current beliefs, knowledge, and skills. Provides equivalent preparation for the ROTC Advanced Course and the Leader’s Training Course.

    Cr. 2-3.
  

  • MSL 30100 - Leadership and Problem Solving

    Examines basic skills that underlie effective problem solving. Review the features and execution of the Leadership Development Program. Analyze military mission and plan military operations. Execute squad battle drills.

    Cr. 3-4.
  

  • MSL 30200 - Leadership and Ethics

    Probes leader responsibilities that foster an ethical command climate. Develop cadet leadership competencies. Prepare for success at National Advanced Leadership Camp. Recognize leader responsibility to accommodate subordinate spiritual needs. Apply principles and techniques of effective written and oral communication.

    Cr. 3-4.
  

  • MSL 40100 - Leadership and Management

    Builds on National Advanced Leadership Camp experience to solve organizational and staff problems. Discuss staff organization, functions, and processes. Examine principles of subordinate motivation and organizational change. Apply leadership and problem-solving principles to a complex case study/simulation.

    Cr. 3-4.
  

  • MSL 40200 - Officership

    Designed to explore topics relevant to second lieutenants entering the Army. Describe legal aspects of decision making and leadership. Analyze Army organization for operations from the tactical to strategic level. Assess administrative and logistics management functions.

    Cr. 3-4
  

  • MSL 49000 - Directed Study In Military Science

    Individual readings, topics, or projects in military science appropriate for advanced undergraduate students.

    Cr. 1-3.
  

  • MSL 49900 - Advanced Military Studies

    Advanced study of technical and professional topics related to military history, leadership, tactics, team development, management, officership, or training.

    Cr. 1-4.
  

  • MUSC 00200 - Piano Accompanying

    Study of the art and practice of accompanying singers and instrumentalists. Areas covered include sight-reading, ensemble playing, coaching techniques, style and interpretation, transposition, and score reading.

    Preparation for Course
    P: Consent of instructor.

    Cr. 1-2.
  

  • MUSC 04000 - University Instrumental Ensembles

    All instrumental ensembles may perform on and off campus. Rehearsals consist of work on musical, instrumental, and aural techniques and stylistic nuances germane to the ensemble. Admittance by audition. Jazz Ensemble: Open to all PFW students by audition. Rehearsal and performance of literature representing the various styles of the jazz ensemble repertoire. University Wind Ensemble: Open to all PFW students by audition. Rehearsal and performance of literature representing the wind ensemble and concert band. Fort Wayne Area Community Band: Open to all PFW students by audition. Personnel includes musicians from the Fort Wayne area. Rehearsal and performance of literature representing the concert band repertoire. PFW/Community Symphony Orchestra: Open to all PFW students by audition. Rehearsal and performance of orchestral literature.

    Cr. 1-2.
  

  • MUSC 04100 - Symphonic Wind Ensemble

    Open to all university students, contingent upon successful audition. Rehearsal and performance of literature representing the wind ensemble and concert band. Focus on musical, instrumental and aural techniques and stylistic nuances germane to the ensemble. Performances on and off campus. Repeatable for credit.

    Cr. 1.
  

  • MUSC 04200 - Jazz Ensemble

    Open to all university students, contingent upon successful audition. Rehearsal and performance of literature representing various styles of the jazz ensemble repertoire. Focus on instrumental and aural techniques and stylistic nuances germane to the ensemble. Performances on and off campus. Repeatable for credit.

    Cr. 1.
  

  • MUSC 04300 - Orchestra

    Open to all university students, contingent upon successful audition. Rehearsal and performance of orchestral literature. Focus on instrumental and aural techniques and stylistic nuances germane to the ensemble. Performances on and off campus. Repeatable for credit.

    Cr. 1.
  

  • MUSC 07100 - University Singers

    Open to all university students, contingent upon successful audition. Rehearsal and performance of choral literature from throughout music history. Performances on and off campus.

    Cr. 1.
  

  • MUSC 07200 - Chamber Singers

    Small, select choral ensemble rehearsing and performing accompanied and a Capella vocal chamber works from throughout music history. Performances on and off campus.

    Preparation for Course
    P: consent of instructor.

    Cr. 1.
  

  • MUSC 07300 - Choral Union

    Open to all university students contingent upon successful audition. Rehearsal and performance of choral literature from through music history. Performances on and off campus.

    Cr. 1.
  

  • MUSC 09500 - Performance Class

    Performance laboratory. Students will attend concerts, recitals and other prescribed music events.

    Cr. 0.
  

  • MUSC 10000 - Guitar

    Cr. 1.
  

  • MUSC 10001 - Piano

    Cr. 2; 700 (2).
  

  • MUSC 10002 - Voice Elective/Secondary

    Elective 100-level. Work for students will be outlined by the instructor to meet individual needs and aims, evaluation will be based upon quality and content of work covered. May be repeated for credit.

    Cr. 1-4.
  

  • MUSC 10003 - Percussion Instrument

    Elective (100) level:  Work for students will be outlined by the instructor to meet individual needs and aims, evaluation will be based upon quality and content of work covered.

    Cr. 1-2.
  

  • MUSC 10004 - Harp

    Cr. 2.
  

  • MUSC 10100 - Music for the Listener - Honors

    Survey course designed to introduce nonmusic major to materials, history, and literature of Western art music from the earliest times to present. Emphasis upon developing listening skills and an awareness of different musical styles through study of major works of outstanding composers of each historical period.

    Cr. 3.
    Notes
    Honors equivalent of MUS Z101.
    To register in an honors course, students must have Honors Program eligibility or instructor’s permission.
  

  • MUSC 10101 - Music for the Listener

    Introduction to the elements of music through the mode of listening and a historical survey of the way those elements have been used in various types of musical compositions. For non-music majors.

    Cr. 3.
    Notes
    Indiana Core Transfer Library course.
  

  • MUSC 10300 - Music Recording And Production I

    An introductory course in music/audio recording and production. Topics will include a review of the physics of sound, critical/technical listening and analysis, microphones, digital audio, basic DAW operation, and basic audio signal flow. Students will be required to create basic music recording projects.

    Preparation for Course
    P: PHYS 10500.

    Cr. 3.
  

  • MUSC 10400 - Recording Crew I

    Students will record Department of Music concerts and recitals in a variety of performance venues under the supervision of the Director of the PFW/Sweetwater Music Techolology program. 

    Preparation for Course
    P: MUSC 11300; C: MUSC 10300.

    Cr. 1.
    Hours
    Lab. 2-3.
    Session Indicators
    Typically offered Fall
  

  • MUSC 10500 - Traditions in World Music

    A survey of non-Western music concentrating on traditional Asian, Middle Eastern, and African styles. Students will learn how to listen to and understand music based on cultural context and technical characteristics. No previous musical experience required.

    Cr. 3.
  

  • MUSC 10900 - Rudiments of Music I

    Fundamentals of notation, ear training, music reading.

    Cr. 2-4.
    Notes
    Grade of B or better required for admission into MUSC 11300 and MUSC 11500
  

  • MUSC 10901 - Computer Skills for Musicians

    Computer music notation systems and the use of word processing, graphics, database, and other computer programs in music research and teaching.

    Cr. 2.
    Variable Title
    (V.T.)
  

  • MUSC 11000 - Begin Piano Class I Nonmusic Majors

    Class piano for beginning piano students who are not music majors.

    Cr. 1-3.
  

  • MUSC 11001 - French Horn

    Elective (100) level:  Work for students will be outlined by the instructor to meet individual needs and aims, evaluation will be based upon quality and content of work covered.

    Cr. 1-2.
  

  • MUSC 11002 - Violin

    Cr. 2; 710 (2).
  

  • MUSC 11003 - Flute and Piccolo

    Cr. 2; 710 (2).
  

  • MUSC 11100 - Class Piano I

    Preparation of non-keyboard concentrations/majors for the keyboard proficiency examination (X299). Six sequential components provide sequential presentation of fundamental skills. Three performance examinations evaluate poise, facility, and general musicianship at the keyboard.

    Preparation for Course
    Music majors only.

    Cr. 1-2.
  

  • MUSC 11300 - Music Theory I

    Study of the elements of basic musicianship; intervals, scales, triads, rhythm and meter, music nomenclature, rudiments of two-part writing and diatonic harmony.

    Preparation for Course
    P: Sufficient score on music theory placement exam or MUSC 10900 with grade of B or higher.

    Cr. 3.
    Notes
    Required for all music majors.
  

  • MUSC 11400 - Music Theory II

    Continuation of the study of harmony in context with four-part writing, diatonic harmony, secondary functions and modulation. Examination of musical forms and structures. Emphasis on musical analysis and compositional applications.

    Preparation for Course
    P: MUSC 11300 or placement examination.

    Cr. 3.
    Notes
    Required for all music majors.
  

  • MUSC 11500 - Sightsinging and Aural Perception I

    Introduction to solfeggio. Development of basic music dictation and sight-singing skills through the use of diatonic melodic and harmonic examples.

    Preparation for Course
    P: Sufficient score on music theory placement exam or MUSC 10900 with grade of B or higher.

    Cr. 1.
    Notes
    Required of all music majors.
  

  • MUSC 11600 - Sightsinging and Aural Perception II

    Further development of music dictation and sight-singing skills through the use of more extended melodic and harmonic examples.

    Preparation for Course
    P: MUSC 11500.

    Cr. 1.
    Notes
    Required of all music majors.-
  

  • MUSC 12000 - Trumpet and Cornet

    Elective (100) level:  Work for students will be outlined by the instructor to meet individual needs and aims, evaluation will be based upon quality and content of work covered.

    Cr. 2.
    Session Indicators
    Typically offered Fall Spring Summer.
  

  • MUSC 12001 - Viola

    Cr. 2.
  

  • MUSC 12002 - Oboe and English Horn

    Cr. 2.
  

  • MUSC 12100 - Class Piano II

    Preparation of non-keyboard concentrations/ majors for the keyboard proficiency examination (X299). Six sequential components provide sequential presentation of fundamental skills. Three performance examinations evaluate poise, facility, and general musicianship at the keyboard.

    Preparation for Course
    P: MUSC 11100; music majors only.

    Cr. 1-2.
  

  • MUSC 13000 - Trombone

    Elective (100) level:  Work for students will be outlined by the instructor to meet individual needs and aims, evaluation will be based upon quality and content of work covered.

    Cr. 1-2.
  

  • MUSC 13001 - Cello

    Cr. 2.
  

  • MUSC 13002 - Clarinet

    Cr. 2; 730 (2).
  

  • MUSC 13100 - Class Piano III

    Continuation of preparation of keyboard proficiency with pass-off of individual components of the examination during the semester. Three performance examinations during the semester evaluate poise, facility, and general musicianship at the keyboard.

    Preparation for Course
    P: MUSC 12100 or departmental placement.

    Cr. 1-2.
  

  • MUSC 13500 - First Year Seminar in Music Education

    Orientation for first year music education majors to the principles and practices of music education through readings, presentations, discussion, field experiences and professional growth activities.

    Cr. 1.
  

  • MUSC 14000 - Introduction to Musical Expression

    Introduction to the fundamentals of music and their appreciation in the process of writing and performing music. Students will learn to read musical notation and develop skills in playing folk guitar as an accompaniment instrument. Students must provide their own guitar.

    Cr. 3.
  

  • MUSC 14001 - Euphonium Elective And Secondary

    Elective (100) level:  Work for students will be outlined by the instructor to meet individual needs and aims, evaluation will be based upon quality and content of work covered.

    Cr. 1-2.
  

  • MUSC 14002 - String Bass

    Cr. 2.
  

  • MUSC 14003 - Bassoon

    Cr. 2.
  

  • MUSC 14100 - Class Piano IV

    Directed study of remaining components of keyboard proficiency examination.

    Preparation for Course
    P: MUSC 13100 or departmental placement; five passed components of keyboard proficiency.

    Cr. 1-2.
  

  • MUSC 15000 - Tuba

    Elective (100) level:  Work for students will be outlined by the instructor to meet individual needs and aims, evaluation will be based upon quality and content of work covered.

    Cr. 2.
  

  • MUSC 15001 - Saxophone

    Cr. 2; 750 (2).
  

  • musc 15100 - Guitar Skills For Music Therapy

    CR: 2.00  A course for students who have no, or very little, guitar-playing experience. Instruction will focus on three areas: reading and playing single-note melodies in the first position, performing simple chord accompaniments, and using proper playing technique

    Cr. 2.
    Hours
    2.0
    Subject Area
    MUSC
  

  • MUSC 15300 - Introduction to Music Therapy

    Introduction to the influences of music on behavior, the healing properties of music, the use of music therapy with a variety of populations, and the development of the music therapy profession. Includes an introduction to the clinical process and music therapy procedures as well as participation in experiential activities. Approved general education course in artistic expression.

    Cr. 3.
    Session Indicators
    (fall, spring, summer)
  

  • MUSC 15400 - Music Therapy Method Basics I

    An overview of the re-creative and receptive music therapy methods and their variations involving active music engagement and interactive experiences.

    Cr. 1.
  

  • MUSC 15500 - Music Therapy Method Basics II

    An overview of the compositional and improvisatory music therapy methods and their variations involving active music engagement and interactive experiences.

    Cr. 1.
  

  • MUSC 18101 - Popular Music Theory, Analysis And Application I

    A study of the foundational elements of music theory with emphasis on application within popular music genres.

    Preparation for Course
    P:  Admission into music major or minor.

    Cr. 3.
  

  • MUSC 18102 - Popular Music Theory, Analysis And Application II

    A continuation of Popular Music Theory, Analysis, and Application I.  This course will introduce elements of more complex chords, chord function, and their notation. Introduction to modern drum transcription and notation, and a continuation of aural skills training using popular music styles and genres as the delivery vehicle.

    Preparation for Course
    P:  MUSC 18101.

    Cr.3.
  

  • MUSC 18203 - Survey Of Music Industry And Copyright

    An overview and introduction to the music industry, including possible careers and copyright.

    Cr. 3.
  

  • MUSC 18241 - Introduction To Performance Techniques

    An instructional music ensemble experience designed to allow students to perform together on their chosen primary, secondary, (or other) instruments in various popular music genres, with emphasis on providing musical support and leadership in a group setting.

    Preparation for Course
    P:  MUSC 18101.

    Cr. 2.
  

  • MUSC 20000 - Percussion Instrument

    Secondary (200) level:  Designed to give the student certain proficiencies so that student may use this application as a tool rather than a medium for performance.

    Cr. 1-2.
  

  • MUSC 20001 - Guitar

    Secondary (200) level:  Designed to give the student certain proficiencies so that student may use this application as a tool rather than a medium for performance.

    Cr. 1-2.
  

  • MUSC 20002 - Piano

    Secondary (200) level:  Designed to give the student certain proficiencies so that student may use this application as a tool rather than a medium for performance.

    Cr. 1-2.
  

  • MUSC 20003 - Organ

    Secondary (200) level:  Designed to give the student certain proficiencies so that student may use this application as a tool rather than a medium for performance.

    Cr. 2.
  

  • MUSC 20004 - Voice

    Secondary (200) level:  Designed to give the student certain proficiencies so that the student may use this application as a tool rather than as a medium for performance.

    Cr. 1-2.
  

  • MUSC 20005 - Harp

    Secondary (200) level:  Designed to give the student certain proficiencies so that student may use this application as a tool rather than a medium for performance.

    Cr. 1-2.
  

  • MUSC 20100 - Music Literature I

    Survey of music from classical antiquity to 1750. Designed to develop a perspective on the evolution of music in its socio-cultural milieu, a repertoire of representative compositions, and a technique for listening analytically.

    Cr. 2.
  

  • MUSC 20101 - Jazz Piano Class I

    Development of basic jazz kepboard skills and techniques for the non-piano jazz major, non-jazz piano major and non-music major.  Basic voicings for common harmonic fornulae used in jazz; chord/scale relationships; simple rhythmic comping patterns.

    Cr. 2
  

  • MUSC 20102 - Voice Class

    Class instruction on vocal production and vocal hygiene. A repertoire of patriotic, religious, folk, musical theatre, and art songs will be developed.

    Cr. 1.
  

  • MUSC 20103 - History of Rock and Roll Music

    A survey of the major trends, styles, and genres of rock music from the earliest recordings to the present day, focusing on the work of the artists and groups who have proven to be of the most enduring significance. Credit given for nonmusic majors only.

    Cr. 3.
  

  • MUSC 20200 - Music Literature II

    Survey of music from the classical era to the present. Designed to develop a perspective on the evolution of music in its socio-cultural milieu, a repertoire of representative compositions, and a technique for listening analytically.

    Preparation for Course
    P: MUSC 20100 with grade of C or better or consent of instructor.

    Cr. 2.
  

  • MUSC 20300 - Music Recording And Production II

    An intermediate course in music recording and production techniques.  Topics will include DAW systems operation and integration, traditional recording studio operation, and audio signal processing.  Students will be required to create music recording projects.

    Preparation for Course
    P:  MUSC 10300.

    Cr. 3.
  

  • MUSC 20400 - Recording Crew II

    Student will record Department of Music concerts and recitals in a variety of performance venues under the supervision of the Director of the PFW/Sweetwater Music Technology program and advanced audio recording students. 

    Preparation for Course
    P: MUSC 10400; C: MUSC 20300.

    Cr. 1.
    Hours
    Lab. 3-4.
    Session Indicators
    Typically offered Fall
 

Page: 1 <- Back 10 … 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 -> 23