Engineering, Technology, and Computer Science Building 327 ~ 260-481-6362
Electrical Engineering is a professional engineering discipline that deals with the study and application of electrical, electronics, and electromagnetism. Purdue University Fort Wayne offers a four-year electrical engineering undergraduate program leading to a Bachelor of Science (BS) degree.
Electrical engineers design, develop, and operate systems that generate and use electrical signals and power. The scope of electrical engineering has expanded tremendously in recent years. It is now the largest branch in engineering, with most graduates employed by manufacturers of electrical and electronic equipment, aircraft, business machines, and professional and scientific equipment.
Our students, while drawn from diverse backgrounds, are all extremely able and committed to learning. Purdue Fort Wayne delivers an exceptional education experience to engineering students, encouraging collaboration and teamwork throughout the curriculum.
Student Learning Outcomes:
As a framework for the continuous improvement policy, the Electrical Engineering program has adopted a set of program educational objectives that describe the anticipated accomplishments of our graduates within a few years after graduation.
The Bachelor of Science in Electrical Engineering (BSEE) program educational objectives are to produce graduates who:
1. Function and communicate effectively to solve technical problems
2. Advance professionally to roles of greater electrical engineering responsibilities and/or by transitioning into leadership positions in business, government, and/or education
3. Participate in life-long learning through the successful completion of advanced degree(s) professional development, and/or engineering certification(s)/licensure
4. Demonstrate a commitment to community by applying technical skills and knowledge to support various service activities
The graduates from the Electrical Engineering program will demonstrate that they have:
- The ability to identify, formulate, and solve complex engineering problems by applying principles of engineering, science, and mathematics.
- The ability to apply engineering design to produce solutions that meet specified needs with consideration of public health, safety, and welfare, as well as global, cultural, social, environmental, and economic factors.
- The ability to communicate effectively with a range of audiences.
- The ability to recognize ethical and professional responsibilities in engineering situations and make informed judgment, which must consider the impact of engineering solutions in global, economic, environmental, and societal contexts.
- The ability to function effectively on a team whose members together provide leadership, create a collaborative and inclusive environment, establish goals, plan tasks, and meet objectives.
- The ability to develop and conduct appropriate experimentation, analyze and interpret data, and use engineering judgement to draw conclusions.
- The ability to acquire and apply new knowledge as needed, using appropriate learning strategies.
- The Electrical Engineering program is accredited by the Engineering Accreditation Commission of ABET.
- The BSEE program is delivered primarily through on-campus courses; however, some of the required General Education courses are available as hybrid and/or on-line courses, and those can be used to satisfy the program requirements.
Declaring this Major:
Students interested in declaring Electrical Engineering as their major may do so in one of two ways:
- On their application when they first apply to Purdue Fort Wayne
- After meeting with an ECE faculty advisor, who will determine that the student has the required math and chemistry background to begin our program
Students in the Electrical Engineering program and Computer Engineering program take many common courses and are encouraged to explore the possibility of dual majors in BSEE and BSCPE. Please contact your advisor for further information.
Electrical Engineering 4-Yr. Plan:
In order to start in the Electrical Engineering program, a student must meet the following criteria:
- Math Placement at or above MA 15400
- Have taken CHM 11100 or 1 year of high school chemistry in the last five (5) years
General Education Requirements
The General Education Requirements for the Electrical Engineering program is provided below. This plan satisfies the competency requirements and the credit hour requirement.
||ENGL 13100 Elementary Composition
||COM 11400 Fundamentals of Speech
MA 16500 Analytical Geometry and Calculus I
MA 16600 Analytical Geometry and Calculus II
||CHM 11500 General Chemistry I
PHYS 15200 Mechanics
||Select from the list of approved courses
(all Competency outcomes must be met)
||Select from the list of approved courses
(all Competency outcomes must be met)
||PHYS 25100 Heat, Electricity and Optics
||ECE 40500 Senior Design I
||Total Credit Hours
- If a student selects a course from categories B5 or B6 that meets only some outcomes but not ALL, the student will be required to take another course from these categories that meet the remaining competency outcomes.
- All courses used to satisfy the General Education Requirements must be completed with a grade of C- or better.
Major and Supporting Courses Required for the BSEE
Core and Concentration Courses Required for the BSEE
Technical Elective Requirements
Following are the lists of approved Technical Electives for the Electrical Engineering program. The BSEE requires 15 hours of Technical Electives. All Electrical Engineering Technical Electives have design content.
Group I Technical Electives
An Electrical Engineering students must take three (3) courses from the Group I list:
Group II Technical Electives
All Electrical Engineering students must take two (2) courses from the Group II list:
- ECE 35800 - Introduction To VHDL Cr. 3.
- ECE 36800 - Data Structures Cr. 3.
- ECE 43700 - Computer Design and Prototyping Cr. 4.
- ECE 48500 - Embedded Real-Time Operating Systems Cr. 4.
- SE 52000 - Engineering Economics Cr. 3. OR
- SE 54000 - Systems Architecture Cr. 3.
- SE 53000 - Systems Engineering Management Cr. 3. OR
- SE 55000 - Advanced Manufacturing Systems And Processes Cr. 3.
- CS 32100 - Introduction To Computer Graphics Cr. 3.
- CS 36000 - Software Engineering Cr. 4.
- MA 17500 - Introductory Discrete Mathematics Cr. 3. OR
- MA 27500 - Intermediate Discrete Math Cr. 3.
- PHYS 32500 - Scientific Computing Cr. 3.
- PHYS 32200 - Optics Cr. 3.
- PHYS 34200 - Modern Physics Cr. 3.
- ECE 49600, ECE 49700, and ECE 49800 can be counted as Group II technical electives, with the maximum of 3 credit hours each, upon the approval by the EE curriculum committee.
- Students may take either SE 52000 or SE 54000, but not both, to count for this Group II Technical Elective requirement.
- Students may take either SE 53000 or SE 55000, but not both, to count for this Group II Technical Elective requirement.
- Students may take either MA 17500 or MA 27500, but not both, to count for this Group II Technical Elective requirement.
- ECE 39595, ECE 49500, or other 5XX-level courses offered by ECE, math, or physics departments may be taken by the student as Group II technical electives with the approval of the advisor.
- A course cannot be counted toward both an undergraduate degree and a graduate degree, with the exception of the students enrolled in the 5-Year BS/MSE Combined Degree Program.
- Electrical Engineering majors are encouraged to explore the requirements for a minor in Math or Physics. For more information, visit the ECE Department website.
Special Content Courses for the BSEE
In general, seminars, survey courses, project courses, special topic course, and informal laboratory courses are considered to be Special Content Courses. A complete list of these courses, as approved by the EE curriculum committee, is given below.
The procedure for offering a Special Content Course is outlined below:
• The proposal for offering the course in a semester must be submitted to the Chair of the EE Curriculum Committee three (3) weeks before the end of the previous semester. The course proposal is simply the course syllabus which includes the following information:
- Course/Project title
- Course/Project description
- Number of credit hours
- Design content
- Topics Covered
- Name of instructor
• If the course is to be counted toward the EE degree program (i.e., as a technical elective), the proposal must also be approved by the EE curriculum committee before the course is offered.
• The instructor is required to submit a written report to the Department of Electrical and Computer Engineering, at the end of the semester, at the same time the course grade is submitted. The format and length of the report is at the discretion of the instructor, but at a minimum it should include the course syllabus and a summary of the results.
You must have a cumulative GPA of at least 2.0 in the 120 credits required for this major.
Total Credits Required: 120
You are responsible for ensuring that you satisfy all graduation requirements specified for each selected program. Thus, it is essential that you develop a thorough understanding of the required courses, academic policies, and procedures governing your academic career. If you cannot complete all program requirements by your stated graduation date but fail to remove those from your plan of study, the Registrar’s Office in consultation with your academic advisor will remove unmet pursuits from your plan of study. Changing curricular records during the graduation term of application may affect state or federal financial aid awards. All requests for exceptions to specific requirements must be made in writing and may be granted only by written approval from the appropriate chair or dean.
Additional Course Use:
- ECE 20700 required, ECE 29300 accepted
- ECE 22900 required, CS 22900 or CS 22700 plus CS 22800 accepted